Reinstall Windows 7 Without CD
3Step U Can Use
1. NETWORK
2. HDD.
3. USB PENDRIVE.
Use (Menggunakan) Pen Drive:
Twin Language :
step1; Gunakan pendrive sekurang-kurangnya 4GB untuk dijadikan keldai untuk bawa software win di dalamnya.. PERHATIAN..!! Pendrive ni boleh di setting m'gunakan WIN7 atau VISTA sahaja. kpd sesiapa yang ada laptop win7 tu seronok la boleh buat. Dan untuk bootnya win7 la yang paling sesuai dan paling senang nak dijadikan kambing hitam.
( Step 1 ; Use Pen drive at least 4GB, Only Windows7 or Vista can use To equipment ).
step2; Cara macamana yek nak buat bootable win7 ni?? tgk kat bawah ni:
( How can do it?? See the article: ).
bootable USB guide, here we assume that you are using either Vista or Windows 7 to create a bootable USB.
1. Insert your USB (4GB+ preferable) stick to the system and backup all the data from the USB as we are going to format the USB to make it as bootable.
2. Open elevated Command Prompt. To do this, type in CMD in Start menu search field and hit Ctrl + Shift + Enter. Alternatively, navigate to Start > All programs >Accessories > right click on Command Prompt and select run as administrator.
3. When the Command Prompt opens, enter the following command:
DISKPART and hit enter.
LIST DISK and hit enter.
Once you enter the LIST DISK command, it will show the disk number of your USB drive. In the below image my USB drive disk no is Disk 1.
4. In this step you need to enter all the below commands one by one and hit enter. As these commands are self explanatory, you can easily guess what these commands do.
SELECT DISK 1 (Replace DISK 1 with your disk number)
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Insert your Windows DVD in the optical drive and note down the drive letter of the optical drive and USB media. Here I use “D” as my optical (DVD) drive letter and “G” as my USB drive letter.
6. Go back to command prompt and execute the following commands:
6.1. Change directory to the DVD’s boot directory where bootsect lives:
d:
cd d:\boot
6.2. Use bootsect to set the USB as a bootable NTFS drive prepared for a Vista/7 image. I’m assuming that your USB flash drive has been labeled disk G:\ by the computer:
bootsect /nt60 g:
(Where “G” is your USB drive letter)
7. Copy Windows DVD contents to USB.
You are done with your bootable USB. You can now use this bootable USB as bootable DVD on any computer that comes with USB boot feature (most of the current motherboards support this feature).
Note that this bootable USB guide will not work if you are trying to make a bootable USB on XP computer.
wintoflash download atau boleh disini hah wintoflash
ATAUPUN CUBA CARA NI;
( Or, U can Try This Step ).
From a Windows 7 computer. Assuming Windows is installed in C drive and your USB flash drive is F drive.
1. Full Format (FAT) your USB flash drive
2. Start command prompt as administrator
2. Type mkdir F:\boot F:\sources and hit enter
3. Type cd C:\recovery and hit enter
4. Type cd and press the Space key then press the Tab key once which will display your GUID with a string of random numbers with letters, and hit the enter key.
5. Type xcopy /H boot.sdi F:\boot and hit enter.
6. Type xcopy /H Winre.wim F:\sources\boot.wim, and hit enter then press F and hit enter again.
7. Type xcopy /H c:\windows\boot\dvd\pcat\bcd F:\boot and hit enter.
8. Type xcopy /H c:\windows\boot\dvd\pcat\en-US\bootfix.bin F:\boot and hit enter.
9. Type xcopy /H c:\windows\boot\pcat\bootmgr F:\ and hit enter.
10. Type attrib -r -s -h /s F:\* and hit enter.
11. Type exit and hit enter
Done
Now, you can use/select USB flash drive as a boot option.
thanks .
NI SATU CARA LAGI NAK FORMAT WIN XP KAT KOMPUTER;
Another Option
3Step U Can Use
1. NETWORK
2. HDD.
3. USB PENDRIVE.
Use (Menggunakan) Pen Drive:
Twin Language :
step1; Gunakan pendrive sekurang-kurangnya 4GB untuk dijadikan keldai untuk bawa software win di dalamnya.. PERHATIAN..!! Pendrive ni boleh di setting m'gunakan WIN7 atau VISTA sahaja. kpd sesiapa yang ada laptop win7 tu seronok la boleh buat. Dan untuk bootnya win7 la yang paling sesuai dan paling senang nak dijadikan kambing hitam.
( Step 1 ; Use Pen drive at least 4GB, Only Windows7 or Vista can use To equipment ).
step2; Cara macamana yek nak buat bootable win7 ni?? tgk kat bawah ni:
( How can do it?? See the article: ).
bootable USB guide, here we assume that you are using either Vista or Windows 7 to create a bootable USB.
1. Insert your USB (4GB+ preferable) stick to the system and backup all the data from the USB as we are going to format the USB to make it as bootable.
2. Open elevated Command Prompt. To do this, type in CMD in Start menu search field and hit Ctrl + Shift + Enter. Alternatively, navigate to Start > All programs >Accessories > right click on Command Prompt and select run as administrator.
3. When the Command Prompt opens, enter the following command:
DISKPART and hit enter.
LIST DISK and hit enter.
Once you enter the LIST DISK command, it will show the disk number of your USB drive. In the below image my USB drive disk no is Disk 1.
4. In this step you need to enter all the below commands one by one and hit enter. As these commands are self explanatory, you can easily guess what these commands do.
SELECT DISK 1 (Replace DISK 1 with your disk number)
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Insert your Windows DVD in the optical drive and note down the drive letter of the optical drive and USB media. Here I use “D” as my optical (DVD) drive letter and “G” as my USB drive letter.
6. Go back to command prompt and execute the following commands:
6.1. Change directory to the DVD’s boot directory where bootsect lives:
d:
cd d:\boot
6.2. Use bootsect to set the USB as a bootable NTFS drive prepared for a Vista/7 image. I’m assuming that your USB flash drive has been labeled disk G:\ by the computer:
bootsect /nt60 g:
(Where “G” is your USB drive letter)
7. Copy Windows DVD contents to USB.
You are done with your bootable USB. You can now use this bootable USB as bootable DVD on any computer that comes with USB boot feature (most of the current motherboards support this feature).
Note that this bootable USB guide will not work if you are trying to make a bootable USB on XP computer.
Kalau x berjaya cuba cara ni pulak;
If unsuccessful
If unsuccessful
Microsoft Provides a tool to do this for you - Windows 7 USB/DVD Download Tool which is available If you need instructions on how to use the tool, see the Microsoft Store Help on the ISO-Tool (http://store.microsoft.com/Help/ISO-Tool).
It surprised me to find that there are very few dead-simple guides to creating a bootable USB thumb/pen/flash drive for a Vista and/or Windows 7 installation. I cobbled together the following from VistaPCGuy and another source I don’t remember right now.
This will walk through the steps to create a bootable USB flash drive for the purpose of installing a Vista or Windows 7 OS. These instructions assume that you have a computer with Windows Vista installed on it.
Required:
- USB Flash Drive (4GB+)
- Microsoft OS Disk (Vista / Windows 7)
- A computer running Vista / Windows 7
Step 1: Format the DriveThe steps here are to use the command line to format the disk properly using the diskpart utility. [Be warned: this will erase everything on your drive. Be careful.]
- Plug in your USB Flash Drive
- Open a command prompt as administrator (Right click on Start > All Programs > Accessories > Command Prompt and select “Run as administrator”
- Find the drive number of your USB Drive by typing the following into the Command Prompt window:
diskpart
list disk
The number of your USB drive will listed. You’ll need this for the next step. I’ll assume that the USB flash drive is disk 1. - Format the drive by typing the next instructions into the same window. Replace the number “1” with the number of your disk below.
select disk 1
clean
create partition primary
select partition 1
active
format fs=NTFS
assign
exitWhen that is done you’ll have a formatted USB flash drive ready to be made bootable.
Step 2: Make the Drive Bootable Next we’ll use the bootsect utility that comes on the Vista or Windows 7 disk to make the flash drive bootable. In the same command window that you were using in Step 1:
- Insert your Windows Vista / 7 DVD into your drive.
- Change directory to the DVD’s boot directory where bootsect lives:
d:
cd d:\boot - Use bootsect to set the USB as a bootable NTFS drive prepared for a Vista/7 image. I’m assuming that your USB flash drive has been labeled disk G:\ by the computer:
bootsect /nt60 g: - You can now close the command prompt window, we’re done here.
Step 3: Copy the installation DVD to the USB driveThe easiest way is to use Windows explorer to copy all of the files on your DVD on to the formatted flash drive. After you’ve copied all of the files the disk you are ready to go.
Step 4: Set your BIOS to boot from USBThis is where you’re on your own since every computer is different. Most BIOS’s allow you to hit a key at boot and select a boot option.
I used these instructions to get my new Dell Mini 9 laptop loaded with Windows 7 (the PDC bits). HTH.
Make a bootable USB installer for Windows XP, Vista, 7 with WinToFlash
Untuk Format Win XP NT2000 & Vista ke Computer Guna USB Pula adalah dgn menggunakan cara tukarkan format winkeflash; Download app di bawah ni:wintoflash download atau boleh disini hah wintoflash
ATAUPUN CUBA CARA NI;
( Or, U can Try This Step ).
From a Windows 7 computer. Assuming Windows is installed in C drive and your USB flash drive is F drive.
1. Full Format (FAT) your USB flash drive
2. Start command prompt as administrator
2. Type mkdir F:\boot F:\sources and hit enter
3. Type cd C:\recovery and hit enter
4. Type cd and press the Space key then press the Tab key once which will display your GUID with a string of random numbers with letters, and hit the enter key.
5. Type xcopy /H boot.sdi F:\boot and hit enter.
6. Type xcopy /H Winre.wim F:\sources\boot.wim, and hit enter then press F and hit enter again.
7. Type xcopy /H c:\windows\boot\dvd\pcat\bcd F:\boot and hit enter.
8. Type xcopy /H c:\windows\boot\dvd\pcat\en-US\bootfix.bin F:\boot and hit enter.
9. Type xcopy /H c:\windows\boot\pcat\bootmgr F:\ and hit enter.
10. Type attrib -r -s -h /s F:\* and hit enter.
11. Type exit and hit enter
Done
Now, you can use/select USB flash drive as a boot option.
thanks .
NI SATU CARA LAGI NAK FORMAT WIN XP KAT KOMPUTER;
Another Option
Preparing your Windows installation CD
One of the requirements for creating our bootable USB flash drive is a Windows XP with Service Pack 2 installation CD. If your Windows XP installation CD doesn't already include Service Pack 2, then you will have to make a CD that includes Service Pack 2 through a technique called slipstreaming.
Other requirements
In addition to your Windows XP installation CD, there are a couple of other things that you are going to need. For starters, you will need the HP USB Disk Storage Format Tool. You can download this tool for free.
Another utility that you are going to need is Bart's Preinstalled Environment Bootable Live Windows CD / DVD, or BartPE for short. You can download this utility for free from the BartPE Web site.
In addition to the software requirements, you must verify that the PC that you will be using to create the Windows deployment has 1.5 GB of free hard disk space (minimum) and supports booting from a USB device. I also strongly recommend that the PC be running Windows XP Service Pack 2. Prior to Service Pack 2, Windows XP sometimes had trouble interacting with USB storage devices.
Formatting the flash drive
Now that you have all of the prerequisites taken care of, it's time to actually start setting up our flash drive. The first step in doing so, as strange as it sounds, is to format the flash drive. Windows will actually let you format a flash drive in the same way that you format a floppy disk. However, formatting a flash drive in this way will not work for this project. Furthermore, using Windows to format a flash drive directly has been known to destroy some types of flash drives.
Instead, you must format the flash drive by using the HP USB Disk Storage Format Tool that you downloaded earlier. To do so, simply open the utility, select the device followed by the FAT file system option and click Start.
Once the device has been formatted, you must make it bootable. To do so, you must copy the BOOT.INI, NTLDR, and NTDETECT from the root directory of your PC's boot drive to the flash drive. These files are hidden by default, so you will either have to configure Windows Explorer to show hidden files (including protected operating system files) or you will have to open a Command Prompt window and use the COPY command to copy the files.
If you choose to use the Windows Explorer method, then open Internet Explorer and enter C: into the address bar so that you are looking at your local hard drive. Next, select the Folder Options command from the Tools menu. When the Folder Options properties sheet opens, select the View tab. Now, just select the Show Hidden Files and Folders and deselect the Hide Extensions for Known File Types and the Hide Protected Operating System Files check boxes. Click OK to continue.
Booting from the USB flash drive
Now that you have formatted your USB flash drive and installed the boot files onto it, the next thing that you must do is to configure your PC to allow you to boot from the flash drive. This is all done through the computer's BIOS Setup. I can't give you specific instructions for this part, because every computer is different. I can give you a few pointers though.
You can access your computer's BIOS by pressing a specific key immediately after you turn the PC on. The key varies, but it is usually either [F1], [F2], or [Delete]. Once you are in the BIOS Setup, you should verify that all of your computer's USB options are enabled. This might include things like support for legacy USB devices or support for USB 2.0. If there is a time out setting for USB devices, you should set it to the max to insure that the system doesn't time out while waiting on the USB device to boot.
Next, find the section on boot device priority. Normally, a USB flash drive (which is usually listed as USB-HDD, but may be listed as a removable device) will have a very low boot priority. If the USB flash drive's boot priority is lower than the hard disk (listed as HDD) then the only time the computer would ever boot off of the USB flash drive is if the system were to fail to boot from the hard disk. You must therefore rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.
Configuring Windows
Now that we have finally made it through all of the prep work, it's time to start setting up Windows. As you have probably already guessed, the process of installing Windows to a flash drive is quite a bit different from your normal, run of the mill installation. There are a couple of reasons for this.
For starters, a full blown Windows XP deployment takes up over a Gigabyte of hard disk space. When you are installing to a flash drive, disk space is a scarce commodity. Even if you have over a Gigabyte of space on your flash drive, you probably don't want to use it all on Windows. It would be nice to have room to install a few applications. Therefore, you need to trim the excess fat off of Windows.
The other reason why the installation process is so different from the usual Windows installation is because Windows Setup is not designed to install Windows to a flash drive. You therefore have to configure Windows using an alternate method.
The PEBuilder utility that you downloaded earlier can take care of both of these issues. PEBuilder is designed to create a build of Windows XP (or Windows Server 2003) that does not take up as much space as a full blown installation. Once you create this new build, you can copy it to the flash drive. For right now, I will show you how to create a basic Windows build and copy it to the memory stick. Unfortunately, it's rather difficult to install applications once Windows is up and running. Therefore, after I show you how to create a basic Windows build, I will show you how to create a build that includes some applications.
Begin the process by opening PEBuilder. When you open PEBuilder, you will see a screen similar to the one that's shown in Figure A. Simply enter the path to the Windows installation files (the ones from your Windows XP with Service Pack 2 installation CD). Next, verify that the Create ISO Image and the Burn to CD check boxes are not selected and then click the Build button. PEBuilder will now create the new Windows build.
Figure A
|
| You must use PEBuilder to create a Windows build that will work with a flash drive. |
Now, it's time to copy Windows to the flash drive. To do so, you will have to use a special batch file that's included with PEBuilder. Open a Command Prompt window and navigate to c:\pebuilder313\plugin\peinst. Now, insert an empty flash drive into the computer's USB port and then execute the file PEINST.CMD. You will now see a menu appear as shown in Figure B.
Figure B
|
| PEBuilder uses a batch file to install Windows onto a flash drive. |
Type 1 and press [Enter] and you will be prompted to enter the path to the build that you have created. Enter C:\pebuilder313\BartPE. Now, type 2, press [Enter], and you will be prompted for the target path. Enter the drive letter that Windows has assigned to your USB flash drive. After doing so, the menu is updated as shown in Figure C. The menu now displays the source path and the destination drive. Type 5 and press [Enter] to install Windows to the flash drive.
| Figure C |
| Use menu option 5 to install Windows to the flash drive. |
Installing applications
Now that I have shown you how to create and install a basic Windows build, I want to talk for a moment about how you can add an application to the build (prior to creating it). The PEBuilder program comes pre-configured to support a number of common Windows applications, but does not come with the applications themselves.
The reason why installing applications can be a little bit tricky is because most Windows applications modify the Windows registry. The build that you are creating is basically a collection of installation files, and the build itself does not contain a registry (the registry gets created when Windows is installed onto the flash drive). As such, PEBuilder uses a sort of registry emulator.
If you go to the C:\PEBUILDER313\PLUGIN folder, you will see sub folders for a number of different applications. If you open one of these application folders, you will see that the folder contains an INF file and a FILES folder. The INF file contains all of the information that would normally go into the registry, and the FILES folder stores all of the program's files.
To see how this works, let's install an application that I'm sure most of you are familiar with; Nero. Begin by installing Nero onto the machine that's running PEBuilder, as if you planned to run Nero locally on that machine. When the installation completes, copy all of the files from C:\Program Files\ahead\Nero to C:\pebuilder313\plugin\nero burning rom\files. In this particular case, the nero burning rom folder is the folder that has been set aside for the Nero application. The Files sub folder is intended to store Nero's system files.
Now, you must take care of Nero's registry entries. To do so, go to the C:\pebuilder313\plugin\nero burning rom folder and open the PENERO.INF file using Notepad. As I explained earlier, the INF file in an application's folder is used to store the application's registry entries. For Nero and all of the other applications that PEBuilder predefines, the INF file is pre-configured. You just have to make a few changes that are specific to your system.
In this particular case, the PENERO.INF file is designed to support both Nero versions 5.x and 6.x. Initially, the lines for both versions are commented out. You must therefore determine which version you have and then remove the semi colon from the beginning of the lines that apply to that version. If you look at Figure D, you can see how the two versions are separated.
Figure D
|
| An application's registry entries are stored in an INF file. |
Once you uncomment the appropriate lines, just replace "Your Name", "Your Company Name" and "Your Serial Number" with your name, your company's name, and your Nero product key. Save the file, and your set to go. The next time that you click the Build button, Nero will be included in the build.
Putting XP in your pocket
Running Windows from a flash drive isn't an exact science. Sometimes the process just doesn't work and there is no good reason why. As more PCs start to support booting from USB devices though, USB boots should become more standardized, and the technique should become more reliable.
1 comments:
hp laserjet m506n driver, hp laserjet m506n driver, hp laserjet m506n driver, hp laserjet m506n driver, hp laserjet m506n driver,
Post a Comment